W&T Electronics 58210, Руководство пользователя, Страница: 47 / 63

47
W&T
Modem Operation
Subject to error and alteration
4.4.24 %Sn (AT%S[1|2])
= Minimum number of stop bits between 2 characters
Default setting: 1= 1 stop bit
This command determines how many stop bits (minimum)
appear between 2 serial characters.
1
The %S command has a delayed effect. The first
OK reply is still with the old data format.
Successive commands in the same command line (such as
& W f o r s a v i n g ) a r e i g n o r e d . T h i s e n s u r e s t h a t a n y
inadvertent change in the baud rate can be restored by
resetting the LAN-Modem.
4.4.25 %Nn (AT%N[0|1])
= Remote maintenance over the network allowed
Default setting: 1 = allowed
Loading firmware updates and copying configuration data is
possible either through the serial port or over the network.
T o p r o t e c t a g a i n s t m i s u s e o f n e t w o r k - s i d e r e m o t e
maintenance, the
&N command makes it possible to
suppress this functionality.
Additional information: Section 5 „Firmware-Update" and
Section 6 „Copying Configuration Data"