W&T Electronics 58210, Руководство пользователя, Страница: 43 / 63

43
W&T
Modem Operation
Subject to error and alteration
• &K6 (RTS/CTS + Xon/Xoff)
Flow control is handled by RTS/CTS and Xon/Xoff . The
m o d e m g e n e r a t e s s i g n a l s f o r b o t h h a n d s h a k e
procedures and allows itself to be prevented from
continuing to send by means of
Xoff or a returned RTS.
4.4.16 &Sn (AT&S[0|1])
= DSR Option Selection
Default setting: 0
This command defines the behavior of the DSR output:
• &S0
The DSR output is always enabled regardless of the
c o n n e c t i o n s t a t u s a n d r e g a r d l e s s o f t h e m o d e
(command or data).
• &S1
DSR is only enabled if the LAN-Modem has an active
connection in data mode.
4.4.17 &Vn (AT&V[0|1|2])
= Display system information
This command causes the LAN-Modem to output its
configuration and connection data:
• &V0
Provides the current configuration data as well as the
d a t a s t o r e d i n n o n - v o l a t i l e p r o f i l e s 0 a n d 1 . I n
addition, the stored destination addresses are output.