9.0 INFORMATION REGARDING FAULTS
SILOTOP R03
2
FIL.100.--.M.EN Issue: A2
06.12
52
Electronic control panel
No.
Problem
Solution
1
Not working
$LIWKH06JUHHQ/('GRHVQRWÀDVK
1) Check the power supply on terminal S1
2) Check the performance of the fuse (for replacement, use a fuse of the
same type and having the same value)
%LIWKH06JUHHQ/('ÀDVKHV
1) Check if there is any enabling signal (verify if the contact S2 is closed)
(CLEAN red LED On)
2) The control panel works properly when there is a power supply of
24 VAC on each pair of EV terminals (See- wiring diagram)