7.0 INFORMATION REGARDING MAINTENANCE
SILOTOP R03
2
FIL.100.--.M.EN Issue: A2
06.12
45
7.2 Filter element cleaning
POLYPLEAT
®
The filter elements are made of highly resistant non-woven spun-bonded material which allows regeneration
provided that a correct cleaning is carried out.
Cleaning can be done using a common vacuum cleaner or
non-metallic
brushes ensuring that the filter surface
is not damaged. Follow the instructions for cleaning and replacement of the filter elements.
The
POLYPLEAT
®
are made of highly resistant non-woven material which can be cleaned a number of times
using a steam jet cleaner. Follow the instructions given below:
1)
Adjustment of high-pressure cleaning device
- Max. pressure: 100 bar
- Max. temperature = 80°C
- Grease-free detergent (pH 5 - 7)
2)
Clean the element as shown in the drawing, tangentially, from a distance of about 40 cm, proceeding gradu-
ally from the top downwards.
3)
When cleaning is complete, turn the element upside down so that the opening faces downwards to allow
the draining out of the water.
4)
Let it dry for about one week at room temperature or in an oven for about 20 hours at a max. temperature
of 80°C.
NOTE:
For instructions regarding other types of NON-WOVEN fabric, contact the Manufacturer.
Jamieson Equipment Company | 5314 Palmero Court | Buford, GA 30518 | 800.875.0280 | [email protected]
