8.0 REPLACEMENT OF PARTS
LBC
2
VAL.LBC.--.M.A2.1219.EN Issue: A2
12.19
53
8.5 Dismantling and disposal
If the device or its components, in case they are broken, worn or at the end of their life envisaged are no longer
usable or repairable than they have to be disposed off.
The scrapping of the device and its components has to be carried out by means of appropriate tools chosen
on the basis of the material to work on (E.g.shear, blow torch, hacksaw, etc.).
All components have to be dismantled and disposed off after the were made pieces so as none of them can
be reused.
Dismantling of the device must be entrusted to personnel specialized in these activities and equipped with
adequate skills.
Dismantle the components of the device concerned; if necessary contact the Manufacturer for further informa-
tion.
The components dismantled have to be separated on the basis of the nature of the materials of which they
consist, in compliance with the laws on the matter of “differential collection and disposal of wastes”.
With reference to the WEEE Directives, electrical and electronic components, marked with a special symbol,
have to be disposed off in authorized collection centres meant for the purpose.
Unauthorized disposal of “Waste Electrical and Electronic Equipment” (WEEE) is punishable with fines gov
-
erned by the laws concerning the matter.
In case it is not possible to restore the proper functioning of the device after failure, proceed to its decommis-
sioning and warn on its failure by means of a special a warning sign, then require the assistance by contacting
the
WAMGROUP S.p.A.
customer service.
8.3 Decommissioning
8.4 Returning the device
When returning the device use the original packaging if it has been preserved, place the device in a small
container, to protect it as best as possible from impact during transport. In any event, make sure there is no
residue material inside the device.
