5.0 INSTALLATION AND FIXING
LBC
2
VAL.LBC.--.M.A2.1219.EN Issue: A2
12.19
40
5.10 Emissions into the atmosphere
The device does not releases emissions into the atmosphere.
5.11 Lighting
The device has to be placed in a properly lightened area.
Danger - Warning
In case of maintenance operations carried out in scarcely lightened areas, use additional lamps that
ensure the proper safety conditions according to the legal provisions in force.
5.12 Inspection
The equipment was tested at the Manufacturer's factory to make sure it matches the operational purposes was
created for. However, some testing has to be repeated by the installer when process related ones are carried
out, to the purpose of ensuring that the equipment matches operation and performances in the installation
place.
Important
When installation is complete, authorized personnel must carry out a general test to ensure that the
safety conditions have been completely satisfied.
The authorized personnel must also check:
- that the linearity error of the Lump Breaking Feeder Valve remains within the values indicated (see the re-
lated paragraph);
- that no tools or other material have been forgotten inside the Lump Breaking Feeder Valve;
- that the fixing screws have been tightened using the prescribed torque;
- that the oil level in the reduction unit is proper (if applicable).
Before starting to operate the Lump Breaking Feeder Valve:
- ensure that the plant in which the Lump Breaking Feeder Valve is installed is compliant to the Directive
2006/42/ CE and to the relevant directives, the safety standards in force and those specifically applicable;
- ensure that the inlet and outlet spouts are connected to the final equipment in order to prevent material leaks
and access to hazardous areas;
- make sure the operation conditions have been met;
- in case of food application, make sure the device as been decontaminated and sanitised.
