5.0 INSTALLATION AND FIXING
LBC
2
VAL.LBC.--.M.A2.1219.EN Issue: A2
12.19
20
5.1 Safety prescriptions for installation
Important
Currently and valid regulation regarding safety clearances must be complied with.
If the prescribed safety clearances are not to be complied with the hazard points must be mechanical
-
ly, electrically and/or electro-mechanically secured.
If quick-release fitting and/or quick-release openings are used in the danger area it is essential that
these sections are secured with mechanical or electrical safety devices.
Danger - Warning
The replacement operations must be carried out by a specialist authorized technician with specific
skills. Before carrying out any operation, provide suitable safety measures and use the appropriate
equipment to prevent risk of work injuries to persons involved in the operations and those nearby.
Harness and handle the sections of the equipment concerned as described and shown in the “Unload
-
ing and lifting method” paragraph.
Before starting installation, define a safety plan which complies with the laws in force regarding workplace
safety.
Danger - Warning
RISK OF INJURY!
A possibility of reaching into the device when the motor is running exists if the above-mentioned
points are not complied with. Limbs may be severed by rotating parts.
CURRENTLY VALID REGULATIONS REGARDING SAFETY CLEARANCES MUST BE COMPLIED WITH
AT ALL TIMES!
If used in the customers own equipment, a risk analysis and risk assessment must be carried out by customer
and implemented accordingly.
The specialist technician, authorized by the installer or owner, must asses whether the area has been prepared
correctly and whether the necessary installation equipment is available (crane, etc.).
Define, on the basis of the configuration of the equipment concerned, the assembly method, if the gear reducer
and electric motor require preassembling.
Clean the coupling surfaces thoroughly.
