3.6 Noise level
LBC
3.0 TECHNICAL FEATURES
2
VAL.LBC.--.M.A2.1219.EN Issue: A2
12.19
14
Important
The noise level depends on several factors such as dimensions, the nature of the material to be con-
veyed and the filling rate.
In accordance with the legal provisions in force, the client must carry out on-site measurement of the
noise level, after assembly and however before commissioning the device, during operation of the de
-
vice in the worst conditions, to ensure that the level of noise reverberation doesn't put into any danger
the operator during the operation of the device.
The vibrations of the device doesn't represent a hazard for the personnel that operates it.
An excessive vibration could be caused by a fault that has to be immediately signalled and repaired to avoid
decreasing the reliability level of the device.
Danger - Warning
Provide the necessary protection from lightning during operation and the related devices to ground
any electrical discharge.
3.8 Overall dimensions and technical features
For an exact identification of the equipment concerned, see the identification plate.
The transport documents indicate the overall dimensions of the Lump Breaking Feeder Valve in addition to the
serial number and the identification code.
The information on the technical features of the
LBC
Lump Breaking Feeder Valve such as diameter, seal type
and blades characteristics are available in Chapter 10.
3.7 Environmental operating limits
Unless otherwise specified, the equipment concerned may be used only within the limits indicated.
- Altitude: less than 1,000 m at sea level
- Environmental temperature: between - 20 °C and + 40 °C
- Cold climates: with temperature less than 5 °C use oil and lubricants suitable to the operating temperature.
