Waltron daytime matrix module WW, Руководство по эксплуатации

Страница: 19 / 21

5.5 Electrical connections
NOTICE! Never connect or disconnect the secondary cables while voltage is applied (while
the power cable is plugged in).
Info! To switch on or off, we recommend using a timed switch, a switched outlet or a power
strip with an integrated fuse.
1. Connect the secondary cable (output)
from the converter to the lamp's
connecting cable.
NOTICE:
Make sure that the
connection is secure and tightly
fitting. You should be able to notice
when the round plug clicks into its
connection.
2. Connect the power cord of the converter
to a grounded (earthed) electrical outlet.
The optional daytime ® light controllers,
distributors, adapters and extension cables
(refer to the accessories list) are all equipped
with an identical circular plug. They are
plugged (simply "Plug & Play") between the
converter and lamp.
For further information and notes on installation
and initial commissioning, please refer to the
documents supplied with the accessories.
6. Maintenance and cleaning
The lamps should be cleaned of any dirt or deposits regularly, especially the insides. (Also refer to
the "Mounting the matrix LED modules" chapter.) Use a clean, lint-free cloth (e.g. a microfibre
cloth) moistened with lukewarm water and, if necessary, a little vinegar. Do not use abrasive,
chemical or solvent-based cleaners.