Waltron daytime matrix module WW, Руководство по эксплуатации

Страница: 16 / 21

Press in manually to mount the manual,
with two steps:
1. Side with no contacts
2. Side with contacts
Push the module into the profile as far as it
will go. Do not use any tools since they
could damage the module.
Screw the module into the lamp profile. Use
only the tool included in the delivery.
1. Screw all the screws straight in until you
feel resistance. (The screws should be
easy to screw in from the start. If they
cannot be easily screwed in, unscrew
them a bit and put them back in.)
NOTICE! Inclined (diagonal)
insertion will damage the thread
grooves.
2. Tighten the screws with moderate and
uniform force until the gap between the
bottom of the module and the profile
partitions is closed.
NOTICE! Screwing in too tightly
will damage the thread grooves.
Info: The gap is considered
closed when you can no longer push
the corner of a sheet of standard
copy paper (80 g/m²) into it.
1.
2.