9032X
8
1
INTRODUCTION
1.1
GENERAL
The Waltron 9032X Sodium Analyzer is a microcontroller-based unit used for online
measurement of sodium content in various water chemistry/treatment applications.
Sampling points for power generation include mixed bed outlets, extraction pump
discharge, boiler feed, boiler drum and steam. The measurement range of the 9032X
analyzer spans from 0.01ppb to 10ppm.
1.2
MAIN FEATURES
Features of the 9032X Sodium Analyzer unit include:
1.
Measurement of sodium concentration
o
Wide range analysis - 0.01ppb to 10ppm. Concentration and
temperature are displayed continuously and analyzer adjusts
automatically to user specified ranges.
o
Automatic temperature compensation
o
Protection from “Hot Sample”
o
Grab sample measurement
o
Missing sample flow switch
2.
Calibration
o
Single & two point calibration
o
Process calibration
o
Fully automatic calibration (single & two point)
o
Low reagent and standard consumption
o
Internal diagnostics used to show probe status
3.
User Interface
o
4.5” color touch screen HMI
o
Large easy to read graphic display
4.
Communication Interface via RS-485 using MODBUS RTU protocol
5.
Analyzer Configuration :
o
User configurable settings for recorder outputs and alarm set points
o
Factory defaults can easily be reloaded to override user setting
6.
Automatically stores last 10 calibration and alarm logs.
7.
Complete analyzer diagnostics
8.
3 Relay outputs for High, Low and General Alarm
9.
Two 4-20mA isolated current outputs
10.
Quick connect electrodes with probe positioning clamps
11.
Redesigned drain for easy sample pH measurement
12.
Automatic KCl refill system (optional)
