WALTHER PILOT WA 560 2-K, Руководство по эксплуатации

Страница: 12 / 20

22 23
Contents
Exploded Drawing 2
Dimension Sheet 4
Declaration of CE-Conformity 23
Replacement parts 24
1 General 25
1.1 Identification of Model Version 25
1.2 Normal Use 25
1.3 Improper Use 26
2 Technical Description 26
3 Safety Warnings 27
3.1 Safety Warting Symbols 27
3.2 Generally Applicable Safety Precautions 27
4 Assembly / Installation 28
4.1 Mounting of Spray Gun 28
4.2 Connection of Input Lines 28
5 Operational Handling 29
5.1 Safety Warnings 29
5.2 Starting/Stopping Requirements 29
5.3 Spray Pattern Test 29
5.4 Spray Pattern Adjustments 30
5.5 Retooling of Spray Gun 31
6 Cleaning 32
6.1 Safety Warnings 32
6.2 Cleaning - Complete 33
6.3 Cleaning - Routine 34
7 Repairs / Replacements 34
7.1 Replacement of defective Needle Seal Packings -Component A 34
7.2 Replacement of defective Needle Seal Packings -Component B 35
7.3 Replacement of Nozzles, Needles, Springs and Seals 35
8 Trouble shooting and Corrective Action 36
9 Disposal of Cleaning / Servicing Substances 36
10 Specification Data 37
Declaration of CE-Conformity
We, the manufacturers of the equipment, hereby declare under our sole respon-
sibility that the product(s) described below conform to the essential safety requirements.
This declaration will be rendered invalid if any changes are made to the equipment wit-
hout prior consultation with us.
Manufacturer WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18 - 30
D - 42327 Wuppertal
Tel.: +49(0)202 / 787 - 0
Fax: +49(0)202 / 787 - 2217
www.walther-pilot.de • e-mail: info@walther-pilot.de
Type Designation Automatic Spray Gun
PILOT WA 560 2-K V 24 560
Intended purpose Processing of sprayable media
Applied Standards and Directives
EU-Mechanical Engineering Directives 2006 / 42 / EC
94 / 9 EC (ATEX Directives)
DIN EN ISO 12100-1
DIN EN ISO 12100-2 DIN EN 1953
DIN EN 1127-1 DIN EN 13463-1
Specification according 94 / 9 / EC
Category 2 Part marking II 2 G c T 5
Tech.File,Ref.:
2402
Authorized with the compilation of the technical file:
Nico Kowalski, WALTHER Spritz- und Lackiersysteme GmbH, Kärntner Str. 18 - 30
D- 42327 Wuppertal
Special remarks :
The named product is intended for installation in other equipment. Commissioning is
prohibited until such time as the end product has been proved to conform to the pro-
vision of the Directives 2006 / 42 / EC.
Wuppertal, the 1st of January 2010
Name: Torsten Bröker
Position: Manager, Design and Development
This Declaration does not give assurance of properties in the sense of product liability. The safety
instructions provided in the product documentation must be observed at all times.
i.V.