WALTHER PILOT PILOT Mini, Руководство по эксплуатации

Страница: 14 / 52

26 27
1 General Information
1.1 Identification of Model Version
Models: Manual Spray Guns PILOT Mini (conventional pressure)
Manual Spray Guns PILOT Mini-MP (medium pressure)
Type: PILOT Mini Gravity-Feed Cup V 10 151
PILOT Mini Material Connection V 10 152
PILOT Mini-MP Gravity-Feed Cup V 10 141
PILOT Mini-MP Material Connection V 10 142
Manufacturer: WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18-30
D-42327 Wuppertal • Germany
Phone: 00 49 / (0)2 02 / 787-0
Fax: 00 49 / (0)2 02 / 787-2217
www.walther-pilot.de • Email:info@walther-pilot.de
1.2 Normal Use
The manual spray gun PILOT Mini is designed exclusively for use with sprayable
media, including water-based and aggressive media, such as:
• paints and laquers
• greases, oils and corrosion preventives
• ceramic glazes
• pickling solutions
Since all wetted parts are made of stainless steel, water-based media may be used
as well.
If you have any questions, please contact WALTHER Spritz- und Lackiersysteme
GmbH, Wuppertal.
Sprayable material should only be applied to work pieces or similar objects.
The temperature of the material to be sprayed should at no time exceed 43° C.
The term 1.2 Normal Use also implies that any and all safety warnings and instruc-
tions laid down in these operating instructions have been read, understood and are
duly complied with.
This equipment complies with the explosion protection requirements of Directive 94
/ 9 / EC (ATEX) for the explosion group, equipment category and temperature class
indicated on the type plate. When using the equipment, the requirements specified
in these Operating Instructions must be observed at all times.
The technical data indicated on the equipment rating plates and the specifications in
the chapter „Technical Data“ must be complied with at all times and must not be
exceeded. An overloading of the equipment must be ruled out.
Repair Sets
WALTHER supplies repair sets containing all wearing parts for the manual spray
guns PILOT Mini and -MP. This wearing parts are shown in
boldface
print in the list
of the replacement parts.
Art. No.
PILOT Mini
Gravity-Feed Cup (FB)
Standard version V 16 098 NA ..3
PILOT Mini
Material Connection (FA)
Standard version V 16 152 NA ..3
PILOT Mini-MP
Gravity-Feed Cup (FB)
Medium-pressure version V 16 141 NA ..3
PILOT Mini-MP
Material Connection (FA)
Medium-pressure version V 16 142 NA ..3
* Nozzle sizes optional: ▪ 0,3 • 0,5 • 0,8 • 1,0 • 1,2 • 1,5 • 1,8 • 2,0 • 2,2 mm ø
Nozzle Sets
Nozzle sets consist of air cap, material nozzle and material needle.
Art. No.
PILOT Mini Gravity-Feed Cup (FB) V 15 098 NA ..3
PILOT Mini Material Connection (FA) V 15 152 NA ..3
PILOT Mini-MP Gravity-Feed Cup (FB) V 15 141 NA ..3
PILOT Mini-MP Material Connection (FA) V 15 142 NA ..3
* Nozzle sizes optional: ▪ 0,3 • 0,5 • 0,8 • 1,0 • 1,2 • 1,5 • 1,8 • 2,0 • 2,2 mm ø
* Please quote the respective sizes when ordering replacements.
We recommand that repair sets are held on stock.