WALTHER PILOT PILOT Mini, Руководство по эксплуатации

Страница: 12 / 52

22 23
Declaration of CE-Conformity
We, the manufacturers of the equipment, hereby declare under our sole responsibility that
the product(s) described below conform to the essential safety requirements. This declaration will
be rendered invalid if any changes are made to the equipment without prior consultation with us.
Manufacturer WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18 - 30
D - 42327 Wuppertal
Tel.: +49(0)202 / 787 - 0
Fax: +49(0)202 / 787 - 2217
www.walther-pilot.de • e-mail: info@walther-pilot.de
Type Designation Models: Hand-held Spray Guns PILOT Mini / -MP
PILOT Mini Gravity-Feed Cup V 10 151
PILOT Mini Material Connection V 10 152
PILOT Mini-MP Gravity-Feed Cup V 10 141
PILOT Mini-MP Material Connection V 10 142
Intended purpose Processing of sprayable media
Applied Standards and Directives
EU-Mechanical Engineering Directives 2006 / 42 / EC
94 / 9 EC (ATEX Directives)
DIN EN ISO 12100-1
DIN EN ISO 12100-2 DIN EN 1953
DIN EN 1127-1 DIN EN 13463-1
Specification according 94 / 9 / EC
Category 2 Part marking
II 2 G c T 6
Tech.File,Ref.:
2401
Authorized with the compilation of the technical file:
Nico Kowalski, WALTHER Spritz- und Lackiersysteme GmbH, Kärntner Str. 18 - 30
D- 42327 Wuppertal
Special remarks :
The named product is intended for installation in other equipment. Commissioning is prohibited
until such time as the end product has been proved to conform to the provision of the
Directives 2006 / 42 / EC.
Wuppertal, the 1st of January 2010
Name: Torsten Bröker
Position: Manager, Design and Development
This Declaration does not give assurance of properties in the sense of product liability. The safety instructions
provided in the product documentation must be observed at all times.
i.V.
Contents
Exploded Drawing 2
Declaration of CE-Conformity 23
Replacement parts 24
1 General Information 27
1.1 Identification of Model Version 27
1.2 Normal Use 27
1.3 Improper Use 28
2 Technical Description 28
3 Safety Instructions 29
3.1 Identification of safety instructions 29
3.2 General Safety Instructions 29
4 Assembly 30
5 Operation 31
6 Retooling and Repairs 32
7 Cleaning and Maintenance 33
8 Troubleshooting 34
8.1 Correction of Spray Pattern Imperfections 35
9 Disposal of Cleaning and Servicing Substances 35
10 Technical Data 36