Wallenstein CT24, Руководство оператора

Страница: 10 / 48

2.6.1 Hydraulic System Safety
• Make sure that all the components in the hydraulic system
are kept clean and in good condition.
• Make sure all components are tight, and that lines, hoses
and couplings are not damaged before applying pressure to
the system.
• Do not use a hand to check for hydraulic
oil leaks. Hydraulic fluid escaping under
pressure can penetrate the skin causing
serious injury. Use a piece of cardboard.
• Wear proper hand and eye protection
when searching for a high-pressure
hydraulic leak.
• Seek medical attention immediately if injured by a
concentrated high-pressure stream of hydraulic fluid.
Serious infection or toxic reaction can develop from
hydraulic fluid piercing the skin surface.
• Do not attempt any makeshift repairs to the hydraulic lines,
fittings or hoses by using tape, clamps, or cements. Doing
so can cause sudden failure and create a hazardous and
unsafe condition.
• Relieve pressure on the hydraulic system before working
it. The hydraulic system operates under extremely high
pressure.
• Replace any hydraulic hose immediately that shows signs
of swelling, wear, leaks, or damage before it bursts.
• Check to make sure hydraulic hoses are not worn or
damaged and are routed to avoid chafing.
• Never adjust a pressure relief valve or other pressure-
limiting device to a higher pressure than specified.
Safety
CT24
Trailer Firewood Conveyor
Safety
10