Wallenstein CT24, Руководство оператора

Страница: 33 / 48

01205
Fig. 40 –
Toplink Installed
5.11 Storage
After the season's use or when the conveyor is not going to
be used for a period, it should be thoroughly inspected and
prepared before being put away.
Repair or replace any worn or damaged components to prevent
any unnecessary down time at the start of next season.
5.11.1 Storing Conveyor
1. Clean off all dirt, mud, and debris.
2. Turn fuel valve OFF on the engine (if equipped). Add fuel
stabilizer to the fuel tank.
3. Make sure the hose ends are capped and stored.
4. Grease conveyor drive bearings—one grease gun shot for
each bearing. See
page 35.
5. Select an area that is dry, level and free of debris to park the
conveyor.
6. Store the conveyor away from human activity. Do not allow
children to play on or around it.
5.11.2 Removing from Storage
1. Check air pressure in tires. See tire sidewall for rating.
2. Review and follow the Pre-operation Checklist. See page
19
3. Review safety and operation procedures. See page 8.
CT24
Trailer Firewood Conveyor
Operating Instructions
33