27
28
6. Transmitter (TX4 Pro)
1. Microphone input
• Connect the supplied lavalier microphone here.
• Fully insert the microphone’s 3.5mm plug and make sure it clicks
into place.
2. Line In
3. Power-LED
•
The power LED flashes blue when the unit is on.
• The power LED glows red when the power is low.
Status
Receiver
Transmitter
The transmitter and the
receiver connects.
Stays blue
Flashes continually
every 2.5 seconds.
The transmitter and the
receiver disconnects.
Flashes continually
every 1 second.
Flashes continually
every 1 second.
Receiver unit is turned
Off (Transmitter is still
On)
Off
Flashes in blue
Status
Receiver
Transmitter
Transmitter unit is
turned OFF (Receiver is
still ON)
Flashes in blue
Off
Low power
Flashes in red
4. Power OFF/ON
5. Pair
This button triggers the connection signal if the connection has been
lost.
See Page 32.
6. Antenna
NOTE
Please don’t touch here during use, otherwise the signal will be
affected.
7. Battery compartment
Accommodates 2 AAA batteries.
8. Clip
1
2
3
4
8
5
6
7
