manualshive.com logo in svg

Waitzinger THP 125/42 R 4 XXT, Руководство пользователя

Поделиться
Скачать
Waitzinger THP 125/42 R 4 XXT Скачать руководство пользователя страница 9

F

OREWORD

C

HAPTER

 1

THP 94/42 R 4 XXT
THP 125/42 R 4 XXT
THP 140 H/42 R 4 XXT

GB-07.2005

1-1

1.

Foreword

Dear customer,

Please read this user manual carefully before first using your truck-mounted concrete pump, so as to ensure that
you use it safely and effectively.

We have written this user manual to familiarise you with the design, use, operation and operating conditions, and
to list the servicing and maintenance work required, together with information on safe working.

Before starting to use the truck-mounted concrete pump, be sure that all the safety conditions have been
satisfied.

This user manual forms part of the total documentation package for the truck-mounted concrete pump. It relates
exclusively to the superstructure that is fitted to the truck. For the truck itself see the separate user manual issued
by the truck manufacturer. There may be separate user manuals for certain components and options. These user
manuals should also be read and complied with.

All repair work should be performed only by authorised skilled staff.

If maintenance work is neglected or improperly performed, we may no longer be liable to perform our warranty
obligations under our conditions of supply.

Only original 

WAITZINGER

 spare parts ensure quality and interchangeability.

NOTE:

墌

Safety instructions should be complied with at all times!

墌

We reserve the right to make technical changes and improvements to
the equipment and its components from the illustrations and data set
out in this user manual.

墌

This user manual is applicable only insofar as the truck-mounted
concrete pump corresponds to the version and equipment described.

墌

In the following sections the truck-mounted concrete pump is also
referred to as the “machine” or “equipment”.

Only qualified and trained personnel over 18 years of age may work on and with the truck-mounted concrete
pump.

Our customer service department will be pleased to offer you further information and advice if despite consulting
this user manual you encounter any problem with your truck-mounted concrete pump.

We wish you all the best in trouble-free driving and use of your truck-mounted concrete pump.

The management

Содержание THP 125/42 R 4 XXT




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды