manualshive.com logo in svg

Waitzinger THP 125/42 R 4 XXT, Руководство пользователя

Поделиться
Скачать
Waitzinger THP 125/42 R 4 XXT Скачать руководство пользователя страница 30

THP 94/42 R 4 XXT

THP 125/42 R 4 XXT

THP 140 H/42 R 4 XXT

GB-07.2005

S

AFETY

 

INSTRUCTIONS

 

AND

 

INFORMATION

C

HAPTER

 2

2-20

2.12.3

Static discharge

墌

At close range to transmitting stations there can arise interference to radio and TV transmissions and hazardous
static electrical discharges from the machine.

墌

Persons touching a statically charged machine will receive an electric shock.

墌

Machines close to transmitting stations should be earthed. Connect the earthing cable to a clean unpainted
metal part of the machine, and anchor it in the ground with a conductive metal rod.

2.12.4

Immediate measures

墌

If an accident involving electric power occurs, immediately institute first aid measures.

墌

If despite all precautions a high-tension cable contact occurs, keep calm, stand still (step voltage), and don’t
touch anything.

墌

Tell those around to keep their distance (step voltage) and have the high-tension cable switched off.

墌

Only then can the machine be moved and the injured be assisted.

2.12.4.1

Actions after contacting a high-tension overhead cable

墌

Stay in the machine

墌

Drive the machine out of the hazard area

墌

Warn those standing around to keep away and not to touch the machine

墌

Have the high-tension cable switched off

墌

Do not leave the machine until the high-tension cable that was contacted / damaged has been switched off

2.13

Operation in winter

When operating in winter, take care:

墌

Increased danger of slipping, especial when cleaning

墌

Keep steps and platforms free of snow and ice

墌

Risk of blockages due to ice in the conveying pipe

Содержание THP 125/42 R 4 XXT




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды