S
TARTING
UP
AND
OPERATING
C
HAPTER
7
THP 94/42 R 4 XXT
THP 125/42 R 4 XXT
THP 140 H/42 R 4 XXT
GB-07.2005
7-14
7.4.2
Controlling the distributor boom using
the radio remote control pendant
•
Set the operating mode selection switch (Item 14, Fig.
7.6) to “Remote control”.
•
Activate the remote control pendant. See information
in the separate user manual supplied by the
manufacturer.
•
Release the Emergency Stop by pressing the Horn/
Reset (
14
). The horn will sound.
•
Switch the selector switch “Outrigger/Boom” (
8
) to
“Boom” and uncap the Emergency Stop button.
•
The 50%/100% switch (
10
) controls the boom speed,
50% when pumping, 100% when deploying / stowing.
•
Press the master switch “Deploy boom element A / Slew boom” (
3
) and deploy boom element A until the catch
hook releases and the boom element B can be deployed (see Fig. 7.12).
•
Press the master switch “Deploy boom element A / Slew boom” (
3
) to move the distributor boom into the
position where the discharge hose retainer can be opened.
•
Press the master switch “Deploy boom element B” (
2
) and deploy boom element B until it is approx. 120º to
boom element A (see Fig. 7.14).
•
Use the joystick “Deploy boom element C and D” (
1
) to deploy boom element C to 90º to boom element B (see
Fig. 7.15).
•
Use the joystick “Deploy boom element C and D” (
1
) to deploy boom element D to 90º to boom element C (see
Fig. 7.15).
•
Position boom element D horizontally approx. 1 m above the ground.
•
Open the catch and release the discharge hose (see Fig. 7.17).
•
Use the joystick s(
1
to
3
) on the radio remote control to move the distributor boom to the desired working
position.
10
14
8
3
1
2
Fig. 7.18 Controll. the distrib. boom from the radio remote control pendant
