Wahl HSI3000 Series, Руководство пользователя

Страница: 8 / 32

Page 8 of 32
3.4.3 Buttons
Operation of the HSI3000 imager application is by means of the 4 hot buttons,
the 4 directional buttons, the menu button, and the laser button (see Figure 10)
The hot buttons are mainly used to give quick control of:
1. zoom function,
2. image capture,
3. measurement cursor selection,
4. auto/manual modes.
It should be noted that the hot button functions change in different modes of
operation. See Section 3.4.4 for more information.
The directional buttons are used to:
1. move the position of the measurement cursors,
2. adjust the level, span, brightness and contrast,
3. navigate around the menus.
See Section 3.4.5 for more information about the directional buttons and see
Section 3.4.6.1 for definitions of level and span, and Section 3.4.9.1. for
definitions of brightness and contrast.
The menu button opens the menus. See Section 3.4.7 for more information.
The laser button must be held down to turn the laser on. See Section 3.4.8 for
more information.
Hot Buttons Menu Button Directional Buttons Laser Button
Figure 10: Buttons
Power Button