Wahl HSI3000 Series, Руководство пользователя

Страница: 5 / 32

Page 5 of 32
2.2.3 Battery Charging
•
The HSI3000’s battery can be charged in the imager by inserting the included 12V power supply into
the DC socket under the cover on the side of the HSI3000 imager; see Figure 4. It takes
approximately 4 hours to fully charge a fully depleted battery if the imager is switched off. Charging
the battery with the imager switched on takes longer.
DC Socket
DC Socket
Figure 4: Connecting the Mains AC Power Supply
3 Operating the HSI3000 Series Thermal Imager
3.1 Hardware
The HSI3000 system is designed for use as a handheld thermal imager. Thermal images stored on the
supplied memory card can be transferred to a PC or laptop computer using the supplied memory card reader.
PC software is supplied for viewing and analysis of saved thermal images.
Laser Pointer
Aperture
Power Button
Lens
Laser Pointer
Button
Slots (see figure 4).
Battery
Compartment
Lens Cap
Figure 5: The HSI3000 Hardware.
Safety notice: The laser used in this device is designated Class 2.
Under no circumstances should personnel look straight into the laser.