Interbus / Introduction
:$*2
Ç
,
2
Ç
6<67(0
3
The clamping force adjusts automatically to the conductor cross section. The flat
clamping face of the CAGE CLAMP spring presses the conductor against the current
bar without damage. Any deformation or movement of the conductor is compensated,
thus eliminating the risk of a loose connection. The contact point between conductor
and CAGE CLAMP is well protected against corrosive deterioration. This connection is
made fast and, furthermore, it is maintenance-free. There is no need for costly periodical
examination of the connections.
The supply modules of the WAGO I/O system are partly equipped with a fuse holder.
This fuse holder can be pulled out in order to break the circuit of the following modules.
To do so, you first have to insert a screwdriver into one of the slots on both sides in
order to pull out the front side of the fuse holder.
The front side now being hinged down makes it possible to remove or to insert the fuse.
After that, you lift up the front side again and push the fuse holder back into its original
position.
