INTERBUS / General conditions
:$*2
Ç
,
2
Ç
6<67(0
25
7
General conditions
This chapter describes the general conditions for error-free running of the
:$*2
Ç
,
2
Ç
6<67(0
7.1
Transporting and storing conditions
The following declarations concern modules which are transported and stored in the
original package.
Condition
allowed values
Free fall
≤
1m
Temperature
-40° to +70° C
Relative humidity
5 to 95% (without condensation)
7.2 Mechanical and climatic conditions
The modules of the
:$*2
Ç
,
2
Ç
6<67(0
are not allowed to be operated without
taking suitable actions
- in places with strong conditions e.g. very dusty rooms or corroding atmosphere
- in place with high concentrations of ionisation
The temperature should be in a range between 0° C and +55° C. The relative humidity
should be in a range of 5 to 95% (without condensation).
The modules should be placed horizontal for better heat dissipation.
The concentration of SO
2
must be below 25 ppm with a relative humidity of < 75%. The
concentration of H
2
S must be below 10 ppm with the same humidity.
The mechanical conditions are given as sinusoidal oscillations.
Frequency range (Hz)
continuous
sometimes
10
≤
f < 57
0.0375 mm amplitude
0.075mm amplitude
57
≤
f
≤
150
0.5 g constant acceleration
1 g constant acceleration
For stronger impulses and oscillations, the acceleration and the amplitude should be
reduced by suitable actions. The following table shows the type of test for the
mechanical conditions.
