INTERBUS S / General information
:$*2
Ç
,
2
Ç
6<67(0
1
FUNCTION
IMPORTANT!
For fast, trouble free installation and start up of the devices described in this manual, the
user should carefully read and follow the advice and explanations offered in this guide.
Explanation of symbols used:
The EXCLAMATION POINT symbol is used when:
a) improper handling could cause damage or destruction of the hard- or software
b) possible injury to persons when interfacing to dangerous process peripherals.
The FINGER symbol describes routines or gives advice for the efficient use of the
devices and optimization of the software.
The FUNCTION symbol refers to helpful notes which are necessary for the correct
function. These remarks should be followed.
The QUESTION MARK gives an explanation of terms.
The symbol BOOKS gives references to additional literature, manuals and data sheets.
The user is most important to us:
We place great importance on the quality and user-friendliness of our manuals. Should
you have any ideas or suggestions for improvement to the contents or graphical design,
we would be glad to receive your proposals.
Notice:
This manual, including all illustrations, is copyrighted. Any use of this manual beyond
the terms of copyright is not allowed. The reproduction, translation, or use of the
electronic and mechanical information is subject to written authorization from WAGO
Kontakttechnik GmbH. Violations will be prosecuted. WAGO Kontakttechnik GmbH
reserves the right of alternation and changes. All rights in case of granting patents or
protective rights are reserved to WAGO Kontakttechnik GmbH.
In the case of non-WAGO products no reference to patent rights is given, but their
existence is noted. The use of the products described in this manuals exclusively
intended for experts trained in PLC programming or electrical engineering, who are
familiar with the national electrical standards in force. WAGO Kontakttechnik GmbH
and overseas subsidiaries will not accept any liability for faulty actions and damages
which occur on WAGO or non-WAGO products when disregarding the information
given in this manual. Any change made in WAGO hard or software (for example entries
in a register) will result in an exclusion of liability on the part of WAGO Kontakttechnik
GmbH.
