WAGO 767-5803/000-800 Скачать руководство пользователя страница 16

Страница: 16 / 102

Device Description

WAGO-SPEEDWAY 767

767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)

Manual

Version 1.1.0

Pos: 18.1 /All e Seri en ( Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebeschreibung/Gerätebeschr eibung - Überschrift 1 @ 3\mod_1233756084656_21.docx @ 27096 @ 1 @ 1

Device Description

Pos: 18.2 /Serie 767 (WAGO-SPEED WAY)/Ger ätebeschrei bung/I/O-Module/Gerätebeschr eibung 767- 58xx @ 7\mod_1268051953922_21.docx @ 51943 @ @ 1

The module 767-5803/000-800 is a hybrid module, which can be operated in five

ways:

•

DO mode

Operating as a digital output module (all channels)

This mode is used, for example, to control solenoid valves, contactors,

encoders, relays or other elect. loads.

•

DI mode

Operation as digital input module (all channels)

This mode is used, for example, to evaluate encoders, sensors, switches and

proximity switches.

•

DIO mode

(Delivery state)

Combined operation of digital inputs and outputs (parametrizable per channel).

This mode combines inputs and outputs on one module. By default, all

channels are configured as digital inputs.

•

DIO mode + 1 counter

Combined operation of digital inputs and outputs with a counter function. The

counter can be configured as an event counter, gate time counter or pulse

duration counter.

•

DIO mode + 2 counters

Combined operation of digital inputs and outputs with two counter functions.

The counter can be configured as an event counter, gate time counter or pulse

duration counter.

The module has many configuration options that can be carried out via a fieldbus

coupler. The module settings take on fieldbus through the device description file

(eg. GSD, GSDML, etc.) of a field bus or via FDT / DTM frame application

(eg. WAGOframe). Detailed information about assignment of module parameters

using a fieldbus in the corresponding manual (e.g., PROFIBUS Fieldbus Coupler

767-1101).

Detailed information about the properties of the module can be found in section

"Technical data".

Pos: 18.3 /Dokumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

Содержание 767-5803/000-800







































































































Результаты поиска

Содержание 767-5803/000-800

Отзывы:

Похожие инструкции для 767-5803/000-800

Бренды по названию

Популярные бренды

WAGO 767-5803/000-800, Руководство пользователя

Результаты поиска

Содержание 767-5803/000-800

Отзывы:

Похожие инструкции для 767-5803/000-800

Бренды по названию

Популярные бренды