WAGO 758-919 Скачать руководство пользователя

Страница: 33 / 66

Configuration 33

758-919 Wireless Access Point

Manual

Version 1.0.0

5.2.2

Easy Config

Figure 11: Easy Config page

To activate an Easy Config mode, select it from the dropdown menu and click on

[

Set

]. The mode will be activated immediately.

Table 16: Easy Config Modes

EC Role

Description

Bluetooth PANU Configure as Bluetooth client and scan for another client (PANU–

PANU).

Reset configuration to factory defaults.

Reset IP settings to factory defaults.

Client

Wait for automatic configuration.

Configure units in mode 4 as clients.

WLAN AP

Configure units in mode 4 as clients.

Restart as access point and connect clients.

Bluetooth NAP

WLAN AP

Configure units in mode 4 as clients.

Restart as access point and connect clients.

Apply PROFINET optimization to all units.

Bluetooth NAP

Bluetooth PANU Configure as Bluetooth client and scan for another client (PANU–

PANU). Apply PROFINET optimization to both units.

(any)

Apply PROFINET optimization and restart.

(any)

Enable PROFIsafe mode.

Notes

•

Mode 1 will scan for units in mode 4. When a unit in mode 4 is detected,

the scanning unit will configure itself as a Bluetooth PANU client, send a

connection configuration to the detected unit, and restart. The detected unit

will also restart and attempt to connect to the first unit as a PANU client.

•

Modes 5, 6, 7 and 8 will scan for units in mode 4. The detected units will be

reconfigured as clients and the scanning unit will restart as an access point.

The clients will then restart and connect to the access point.

•

Modes 7 and 8 will additionally apply PROFINET optimization to all the

units. PROFINET messages will then have priority over TCP/IP frames.

Содержание 758-919



































































Результаты поиска

Содержание 758-919

Отзывы:

Похожие инструкции для 758-919

Бренды по названию

Популярные бренды

WAGO 758-919, Руководство пользователя

Результаты поиска

Содержание 758-919

Отзывы:

Похожие инструкции для 758-919

Бренды по названию

Популярные бренды