Configuration 41
758-919 Wireless Access Point
Manual
Version 1.0.0
5.2.6
Bluetooth Settings – General
Figure 15: Bluetooth Settings
Table 22: Bluetooth Settings
Adjustment
Description
Enable
Enable/disable the Bluetooth interface.
Operating Mode
PANU (Client)
= The unit will operate as a Bluetooth PAN (Personal
Area Network) User device. It can connect to another single Bluetooth
PANU device or to a Bluetooth Network Access Point.
NAP (Access Point)
= The unit will operate as a Bluetooth Network
Access Point. It can connect to up to 7 Bluetooth PANU devices.
Local Name
Identifies the unit to other Bluetooth devices. If left blank, the unit will
use a default name including the last 6 characters of the MAC ID.
Connectable
Enable to make the unit accept connections initiated by other Bluetooth
devices.
Discoverable
Enable to make the unit visible to other Bluetooth devices.
Security Mode
Disabled
= No encryption or authentication.
PIN
= Encrypted connection with PIN code security. This mode only
works between two units of this type and brand (not with third-party
devices). PIN codes must consist of 4 to 6 digits.
Just Works
= Encrypted connection without PIN code.
Paired Devices
Lists the currently connected Bluetooth devices.
The settings for the PANU mode are as follows!
The settings for the PANU mode (Connect to) can be found in the following
chapter!
