Configuration 31
758-919 Wireless Access Point
Manual
Version 1.0.0
5
Configuration
5.1
General
WAGO Wireless Access Point should normally be configured via the web
interface. Parameters can be set individually or using one of the pre-configured
Easy Config modes.
The web interface is accessed by pointing a web browser to the IP address of the
Wireless Access Point. The default address is 192.168.0.99. The computer
accessing the web interface must be in the same IP subnet as the Wireless
Access Point.
Figure 9: Web interface
The device is configured as a WiFi access point in factory default. The DHCP
server is active and assigns IP addresses from 192.168.0.201 to 192.168.0.206
to WiFi clients.
Advanced configuration can be carried out by issuing AT (modem) commands
through the web interface or over a Telnet or RAW TCP connection to port 8080.
See the AT Commands or the Help page in the web interface for more
information.