WAGO 758-919 Скачать руководство пользователя

Страница: 26 / 66

26 Device Description

758-919 Wireless Access Point

Manual

Version 1.0.0

3.8.1

Radio Regulatory Compliance

FCC Compliance Statement

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

a minimum distance of 20 cm between the radiator and your body.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

this device may not cause harmful interference, and

this device must accept any interference received, including interference

that may cause undesired operation.

This product contains FCC ID:

PVH0965.

Damage to Property!

Any changes or modifications not explicitly approved by WAGO Kontakttechnik

GmbH & Co. KG could cause the module to cease to comply with FCC rules part

15, and thus void the user's authority to operate the equipment.

Industry Canada Statement

This equipment complies with IC RSS-102 radiation exposure limits set forth for

an uncontrolled environment. This equipment should be installed and operated

with a minimum distance of 20 cm between the radiator and your body.

Operation is subject to the following two conditions:

this device may not cause harmful interference, and

this device must accept any interference received, including interference

that may cause undesired operation of the device.

This product contains IC ID:

5325A-0965.

Содержание 758-919



































































Результаты поиска

Содержание 758-919

Отзывы:

Похожие инструкции для 758-919

Бренды по названию

Популярные бренды

WAGO 758-919, Руководство пользователя

Результаты поиска

Содержание 758-919

Отзывы:

Похожие инструкции для 758-919

Бренды по названию

Популярные бренды