WAGO 2789-9023, Руководство пользователя

Страница: 6 / 94

2789-9023 Provisions
6 Product manual | Version: 1.0.0
EtherNet/IP Communication Module
1 Provisions
This document applies to the following product:
2789-9023 (EtherNet/IP Communication Module)
Product detail page
ü
www.wago.com/2789-9023
The product must only be installed and operated in accordance with the operating instruc-
tions. Knowledge of the operating instructions is required for proper use. You can find all
documents and information on the detailed product page.
Additional document
•
&
Product Manual of the Pro 2 Power Supply used
1.1 Intended Use
The 2789 Series EtherNet/IP Communication Module is used for communication with a
EtherNet/IP fieldbus environment and is plugged into a subordinate WAGO Power Supply
Pro 2.
The product is an open equipment and is designed for installation in an additional enclo-
sure.
• This product is intended for installation in automation technology systems.
• The product is designed for use in dry indoor rooms.
• Operation of the products in industrial area is permitted.
• The product meets the EMC requirements for the residential, office and commercial
area as well as small business, if the product used complies with the required emis-
sions of interference (emission limits).
• Operation of the product in other application areas is only permitted when correspond-
ing approvals and labeling are present.
Improper Use
Improper use of the product is not permitted. Improper use occurs especially in the follow-
ing cases:
• Non-observance of the intended use
• Use without protective measures in an environment in which moisture, salt water, salt
spray mist, dust, corrosive fumes, gases, direct sunlight or ionizing radiation can occur
• Use of the product in areas with special risk that require continuous fault-free operation
and in which failure of or operation of the product can result in an imminent risk to life,
limb or health or cause serious damage to property or the environment (such as the
operation of nuclear power plants, weapons systems, aircraft and motor vehicles)
Warranty and Liability
The terms set forth in the General Business and Contract Conditions for Delivery and
Service of WAGO GmbH & Co. KG and the terms for software products and products with
integrated software stated in the WAGO Software License Contract – both available at
ü
www.wago.com – shall apply. In particular, the warranty is void if:
• The product is improperly used.