WAGNER VM 5000, Руководство по эксплуатации

Страница: 9 / 68

9
VM 5000
OPERATING MANUAL
EDITION 08/2014 ORDER NUMBER DOC2318718
2.4
SAFETY PARAMETERS
WAGNER accepts no liability for any damage arising from non-intended use.
Use the device only to work with the products recommended by WAGNER.
Operate only the device as a whole.
Do not deactivate safety fi xtures.
Use only WAGNER original spare parts and accessories.
The device may only be operated under the following conditions:
The operating staff must be trained based on this operating manual.
The safety regulations listed in this operating manual must be observed.
The operating, maintenance and repair information in this operating manual must be
observed.
The statutory requirements and accident prevention regulation standards in the
country of use must be observed.
The control unit may only be operated if all parameters are set and all measurements/
safety checks have been carried out correctly.
2.3
USE IN POTENTIALLY EXPLOSIVE AREAS
The control unit is designed together with the spray gun in accordance with the
94/9/EC (ATEX) directive. The spray gun is suitable for use in potentially explosive areas in
zone 1 and the control unit in the zone 2 area.
(See Chapter 3 "Explosion Protection Identifi cation".)
If the Wagner high-voltage Universal cascade is operated in connection with the VM 5000
control unit, the high-voltage cascade cannot be used in an Ex zone. However, the control
unit may be still used in the zone 2 area.
The "Restricted breathing" type of explosion protection is only guaranteed if all sealed
elements in the control unit are present and undamaged. During operation, all electric
connections of the control unit have to be tightly sealed with the corresponding plug
connectors or closing elements.