WAGNER VM 5000, Руководство по эксплуатации

Страница: 16 / 68

16
VM 5000
OPERATING MANUAL
EDITION 08/2014 ORDER NUMBER DOC2318718
Carry out the work steps as described in the "Pressure Relief" chapter:
- If pressure relief is required.
- If the spraying work is interrupted or stopped.
- Before the device is cleaned on the outside, checked or serviced.
- Before the spray nozzle is installed or cleaned.
In the event of skin injuries caused by paint or fl ushing agents:
Note the paint or fl ushing agent that you have been using.
Consult a doctor immediately.
Avoid risk of injury from recoil forces:
Ensure that you have firm footing when operating the spray gun.
Only hold the spray gun briefl y in a position.
4.2.2
GROUNDING THE DEVICE
Friction, fl owing liquids, and air or electrostatic coating processes create charges. Flames
or sparks can form during discharge. Grounding prevents electrostatic charging.
Ensure that the device is grounded. See chapter "Grounding".
Ground the work pieces to be coated.
Ensure that all persons inside the working area are grounded, e.g., that they are wearing
static dissipative shoes.
Wear static dissipative gloves when spraying. Grounding takes place via the spray gun
handle.
The spray substance supply (spray substance tank, pump, etc.) must be grounded.