WAGNER VM 5000, Руководство по эксплуатации

Страница: 53 / 68

53
VM 5000
OPERATING MANUAL
EDITION 08/2014 ORDER NUMBER DOC2318718
DANGER
Incorrect maintenance/repair!
Danger to life and d amage to the device .
Only a WAGNER service center or a suitably trained person may
carry out repairs and replace parts.
Only repair and replace parts that are listed in the "Spare Parts"
chapter and that are assigned to the device.
Before all work on the device and in the event of work
interruptions:
- Switch off the energy/compressed air supply.
- Relieve the pressure from the spray gun and device.
- Secure the spray gun to prevent actuation.
Observe the operating manual and service manuals at all times
when carrying out work.
8.2.3
SAFETY CHECKS
The functionality and completeness of the control unit must be checked regularly. All
sealed elements on the control unit must be present and undamaged. During operation,
all electric connections of the control unit have to be tightly sealed with the corresponding
plug connectors or closing elements.
Leak test
The leakage tightness of the device has to be checked at least every 3 years. The "Restricted
breathing" requirements according to DIN EN 60079-15:2011 have to be fulfi lled. This
inspection may only be carried out by a skilled person or by trained WAGNER service
personnel. When carrying out the leakage tightness test, the mains input terminal serves
as a test port.
Sparks form when live components are separated or connected!
Explosion hazard from electric sparks.
Do not disconnect plug connections under voltage.
Do not open fuse holders under voltage.
Do not remove the service plug cover under voltage.
WARNING