WAGNER VM 5000, Руководство по эксплуатации

Страница: 14 / 68

14
VM 5000
OPERATING MANUAL
EDITION 08/2014 ORDER NUMBER DOC2318718
4
GENERAL SAFETY INSTRUCTIONS
4.1
SAFETY INSTRUCTIONS FOR THE OPERATOR
4.1.1
ELECTRICAL EQUIPMENT
4.1.2
STAFF QUALIFICATIONS
Keep this operating manual on hand near the device at all times.
Always follow local regulations concerning occupational safety and accident
prevention.
Ensure that the device is operated, maintained and repaired only by trained staff .
4.1.3
SAFE WORK ENVIRONMENT
Ensure that the fl oor in the working area is static dissipative in accordance with
EN 61340-4-1 (resistance must not exceed 100 megohms).
Ensure that all persons within the working area wear static dissipative shoes. Footwear
must comply with EN 20344. The measured insulation resistance must not exceed
100 megohms.
Ensure that during spraying, persons wear static dissipative gloves. Grounding takes
place via the spray gun handle.
If protective clothing is worn, including gloves, it has to comply with EN 1149-5. The
measured insulation resistance must not exceed 100 megohms.
Paint mist extraction systems/ventilation systems must be fi tted on site according to
local regulations.
Electrical devices and equipment
To be provided in accordance with the local safety requirements with regard to the
operating mode and ambient infl uences.
May only be maintained by skilled electricians or under their supervision. With open
housings, there is a danger from line voltage.
Must be operated in accordance with the safety regulations and electrotechnical
regulations.
Must be repaired immediately in the event of problems.
Must be decommissioned if they pose a hazard or are damaged.
Must be de-energized before work is commenced on active parts. Inform staff about
planned work. Observe electrical safety regulations.
Connect all devices to a common grounding point.
Only operate the device with a properly installed socket with a protective ground wire
connection.
Keep liquids away from electrical devices.