WAGNER VM 500, Перевод оригинального руководства по эксплуатации

Страница: 23 / 40

23
VM 500
B_03234
R max < 1 M
Ω
OPERATING MANUAL
EDITION 07/2014 ORDER NUMBER DOC2344502
Minimum cable cross-section
Control unit 4 mm2 (AWG 12)
Product supply 4 mm2 (AWG 12)
Paint tank 4 mm2 (AWG 12)
Grounding scheme (example)
Conveyor
Control unit
Grounding
cable
Spraying stand
Floor static dissipative
Work piece
Product
supply
Paint tank
A poorly grounded work piece causes:
very bad wrap around,
uneven coating and
back spraying to the spray gun (contamination) and coater.
Prerequisites for perfect grounding and coating are:
Clean work piece suspension.
Grounding of spray booth, conveyor system and suspension on the building side in
accordance with the operating instruction or the manufacturer's information.
Grounding of all conductive parts within the working area.
The grounding resistance of the work piece may not exceed 1 MΩ (Megohm).
Note:
Resistance to ground measured at 500 V or 1000 V.
Connect the control unit to the signal ground.
Note for the sprayer
Safety shoes and gloves,
if used, must be static
dissipative .
Conveyor 16 mm2 (AWG 6)
Booth 16 mm2 (AWG 6)
Spraying stand 16 mm2 (AWG 6)
Heavy paint mist if grounding is insuffi cient!
Danger of poisoning.
Insuffi
cient paint application quality.
Ground all device components.
Ground the work pieces to be coated.
WARNING