manualshive.com logo in svg

WAGNER PM500, Руководство по эксплуатации, Страница: 38 / 52

Поделиться
Скачать
WAGNER PM500 Скачать руководство пользователя страница 38

38

 

B_04213

B_04215

B_04216

1

B_04217

2

OPERATING MANUAL

VERSION 01/2013

ORDER NUMBER DOC 2335747

9.3 

DIAPHRAGM REPLACEMENT (DUE TO BREAKAGE)

If the diaphragms are replaced as a result of breakage, all the internal parts of the motor 
must be cleaned and the condition of the seals and reversing valve, which may have been 
damaged by contact with the pump fl uid, must be checked.
Mark the coupled parts (diaphragm covers, manifold, covers) with a felt-tip pen so as to 
make subsequent reassembly easier.
a)

Remove the suction and delivery manifolds.

b)

Unscrew the mounting screws from the two diaphragm covers and remove the 
diaphragm covers.

c) Remove the reversing valve (1).

d) With the help of two wrenches located opposite each other (or hexagonal socket 

spanner and bench vice), loosen one of the central nuts and remove the fi rst 
diaphragm (2). The diaphragm is composed of two layers: the material side and the 
air side.

Содержание PM500





















































Отзывы:

Нет отзывов