WAGNER GM 50000EAC, Перевод оригинального руководства по эксплуатации

Страница: 27 / 108

27
OPERATING MANUAL
EDITION 05/2015 ORDER NUMBER DOC2319150
6
ASSEMBLY AND COMMISSIONING
6.1
TRAINING ASSEMBLY/COMMISSIONING STAFF
Incorrect installation/operation!
Risk of injury and damage to the device.
The assembly and commissioning staff must have the technical
skills to safely undertake commissioning.
When assembling, commissioning and carrying out all work,
read and follow the operating manuals and safety regulations
for the additionally required system components.
WARNING
6.2
STORAGE CONDITIONS
Until the point of assembly, the device must be stored in a dry location, free from vibrations
and with a minimum of dust. The device must be stored in closed rooms.
The air temperature at the storage location must be between -20 °C and +60 °C (-4 °F and
+140 °F).
The relative air humidity at the storage location must be between 10 and 95% (without
condensation).
6.3
INSTALLATION CONDITIONS
The air temperature at the installation site must be in a range between 0 and 40 °C; 32 and
132 °F.
The relative air humidity at the installation site must be between 10 and 95% (without
condensation).
A skilled person must check to ensure that the device is in a reliable state after it is installed
and commissioned.
Check the delivery package against the delivery note. Become familiar with the function
of the spray gun and all the other components used. Carefully read the accompanying
operating manual. Note the special requirements of the designated electrostatic AirCoat
spray procedure.
6.4
ASSEMBLY AND INSTALLATION