WAGNER Cobra 40-10, Руководство по эксплуатации

Страница: 8 / 60

8
Cobra 40-10/2K .
OPERATING MANUAL
EDITION 10/2010 PART NO. DOC322871
2.2.4
CLEANING
2.2.5
HANDLING HAZARDOUS LIQUIDS, VARNISHES AND PAINTS
2.2.6
TOUCHING HOT SURFACES
2.3
CORRECT USE
œ De-energize the unit electrically.
œ Disconnect the pneumatic supply line.
œ Relieve the pressure from the unit.
œ Ensure that the flash point of the cleaning agent is at least 5 K above the ambient
temperature.
œ To clean, use only solvent-free cloths and brushes. Never use hard objects or spray on
cleaning agents with a gun.
An explosive gas/air mixture forms in closed containers.
œ When cleaning units with solvents, never spray into a closed container.
œ Earth the container.
œ
When preparing or working with paint and when cleaning the unit, follow the working
instructions of the manufacturer of the paints, solvents and cleaning agents being
used.
œ
Take the specified protective measures, in particular wear safety goggles, protective
clothing and gloves, as well as hand protection cream if necessary.
œ
Use a mask or breathing apparatus if necessary.
œ
For sufficient health and environmental safety: Operate the unit in a spray booth or on
a spraying wall with the ventilation (extraction) switched on.
œ
Wear suitable protective clothing when working with hot materials.
➞
Touch hot surfaces only if you are wearing protective gloves.
➞
When operating the unit with a coating material with a temperature of > 43 °C; 109.4 °F:
- Identify the unit with a warning label that says „Warning - hot surface“.
Order No.
9998910 Information label
9998911 Safety label
7!'.%2ACCEPTSNOLIABILITYFORANYDAMAGEARISINGFROMINCORRECTUSE
œ 5SETHEUNITONLYTOWORKWITHTHEMATERIALSRECOMMENDEDBY7!'.%2
œ /PERATETHEUNITONLYASANENTIREUNIT
œ $ONOTDEACTIVATESAFETYEQUIPMENT
œ 5SEONLY7!'.%2ORIGINALSPAREPARTSANDACCESSORIES