WAGNER Cobra 40-10, Руководство по эксплуатации

Страница: 18 / 60

18
Cobra 40-10/2K .
B_03112
4
1
6
9
3
5
2
7
14
16 (A)
16 (B)
A
B
19
18
17
11
12
15
8 (A)
10 (A)
10 (B)
8 (B)
Cobra 40-10/2K
A + B
B
B
A
A
OPERATING MANUAL
EDITION 10/2010 PART NO. DOC322871
General informations
The double diaphragm pump is driven with compressed air. Compressed air moves the air piston in the air
motor (4) and concomitantly the piston rod in the pressure stage (9) on and off. At the end of each stroke the
compressed air is redirected by a changeover valve and the control piston. The up- and down stroke of the
2 diaphragms within the colour stage is raised by hydraulic oil, which is moved by the piston in the pressure
stage. At each piston stroke working material will be sucked in and delivered to the gun at the same time.
Air motor (4)
The air motor with its pneumatic reverse (1) does not require pneumatic oil.
The compressed air is fed to the motor over the air regulator (2) and the ball valve (3).
The air motor is fi tted with a safety valve. The safety valve has been set and sealed at the factory. With pressures
over and above the permissible operating pressure the valve, which is held with a spring, automatically opens
and releases the excess pressure.
4.4
FUNCTION
1 Control housing with
integrated silencer
2 Air pressure regulator
3 Ball valve
4 Air motor
5 Compressed air inlet
6 Fastening fl ange
4.4.1
PUMP
7 Filter pressure regulator
AirCoat (Option)
8 Material outlet (A, B)
9 Pressure stage 2K
10 Suction system material
inlet (A, B)
11 Earth connection
12 Casing material pump
14 valve pushers (A, B)
15 Exhaust air cap
16 Relief valve (A, B)
17 Mixing block holder
18 Mixing block
19 Mixing pipe