WAGNER Cobra 40-10, Руководство по эксплуатации

Страница: 27 / 60

27
Cobra 40-10/2K .
"?
"?
A
B
B_03118
OPERATING MANUAL
EDITION 10/2010 PART NO. DOC322871
5.2.3
FILLING WITH WORKING MATERIAL
1. Place suction hoses (7a and 7b) with return
tubes (4a and 4b) in the containers with working
material (6a) and hardener (6b).
2. Set pressure regulator (1) to approx. 0.05 MPa;
0.5 bar; 7.25 psi.
3. Relief valves (3a and 3b) to the return tube open.
4. Slowly open ball valve (2).
5. Adjust the air pressure on the pressure regulator
(1) so that the pump runs regularly.
6. Close ball valve (2) as soon as pure working
material starts coming from the return hoses (4a
and 4b).
7. Turn relief valves (3a and 3b) in spraying position
(to the mixer 9 leading).
8. Point the gun (8), without nozzle, into empty
container (5a) and open it.
9. Slowly open ball valve (2).
10. Close ball valve (2) as soon as pure working mixed
material starts coming from the gun.
11. When there is no pressure remaining in the system
close gun.
12. Secure the gun.
Ball valve is closed
Relief valves
A and B
Open ball valve
5.3.1
SPRAYING
1. Secure gun (8) and place nozzle in the gun.
2. Slowly open ball valve (2).
3. Set required working pressure on the pressure regulator (1).
4. Optimize the spraying results as laid down in the gun instructions.
5. Start work process.
Note : Functionally it is permissible, that the pump runs 1 - 2 DS/min after, when
the gun is closed
5.3
WORKS
14. When there is no pressure remaining in the system
close gun.
15. Secure the gun.
16. Dispose of the contents of the containers (5a and
5b) according to the local regulations.