manualshive.com logo in svg

WAGNER 8286, Перевод оригинального руководства по эксплуатации

Поделиться
Скачать
WAGNER 8286 Скачать руководство пользователя страница 9

9

 

OPERATING MANUAL

VERSION 09/2016

ORDER NUMBER DOC 2366672

3 

IDENTIFICATION

3.1 

EXPLOSION PROTECTION IDENTIFICATION

As defi ned in the Directive 2014/34/EU (ATEX), the device is suitable for use in 
potentially explosive areas.

CE mark (European Communities)
Symbol for explosion protection
Device class II
Category 2 (Zone 1)
Ex-atmosphere gas

C

Constructional security
Explosion group
Temperature class: maximum surface temperature < 135 °C; 275 °F

Maximum surface temperature

  The maximum surface temperature of the pump depends on the operating conditions 

(heated product) and not on the device (frictional heat).

Ignition temperature of the coating product

  Ensure that the ignition temperature of the coating product is above the maximum 

surface temperature.

Ambient temperature

  The permissible ambient temperature is: +10 °C to +60 °C; +50 °F to 140 °F.

Medium supporting atomizing

  To atomize the product, use only weakly oxidizing gases, e.g., air.

Safe handling of WAGNER spray devices

Mechanical sparks can form if the device comes into contact with metal.
In an explosive atmosphere:

  Do not knock or push the device against steel or rusty iron.
  Do not drop the device.
  Use only tools that are made of a permitted material.

Содержание 8286





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды