manualshive.com logo in svg

WAGNER 8286, Перевод оригинального руководства по эксплуатации

Поделиться
Скачать
WAGNER 8286 Скачать руководство пользователя страница 24

24

 

OPERATING MANUAL

VERSION 09/2016

ORDER NUMBER DOC 2366672

6.5.1 

VENTILATION OF THE SPRAY BOOTH

Toxic and/or fl ammable vapor mixtures!

Risk of poisoning and burns.

  Operate the device in a spray booth approved for the working 

materials.

 -or-

  Operate the device on an appropriate spraying wall with the 

ventilation (extraction) switched on.

  Observe national and local regulations for the exhaust air speed.

WARNING

6.5.2 

AIR SUPPLY

You must ensure that only dry, clean atomizing air is used in the spray gun. Dirt and 
moisture in the atomizing air worsens the spraying quality and spraying pattern.

Hose connections!

Risk of injury and damage to the device.

  Do not exchange hose connections of product hose and air 

hose.

WARNING

6.5.3 

PRODUCT SUPPLY

Bursting hose, bursting threaded joints!

Danger to life from injection of product.

  Ensure that the hose material is chemically resistant to the 

sprayed products.

  Ensure that the spray gun, threaded joints and product hose 

between the device and the spray gun are suitable for the 
pressure generated in the device.

  Ensure that the following information can be seen on the high-

pressure hose:

 - 

Manufacturer

 

- Permissible operating pressure

 

- Date of manufacture.

DANGER

Содержание 8286





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды