manualshive.com logo in svg

WAGNER 8286, Перевод оригинального руководства по эксплуатации

Поделиться
Скачать
WAGNER 8286 Скачать руководство пользователя страница 32

32

 

OPERATING MANUAL

VERSION 09/2016

ORDER NUMBER DOC 2366672

8 

CLEANING AND MAINTENANCE

Cleaning work should be undertaken regularly and carefully by qualifi ed and trained staff . 
They should be informed of specifi c hazards during their training.

The following hazards may arise during cleaning work:

-

Health hazard from inhaling solvent vapors

-

Use of unsuitable cleaning tools and aids

8.1 

CLEANING

8.1.1 

CLEANING STAFF

Brittle fi lter pressure regulator! 

The tank on the fi lter pressure regulator becomes brittle through contact 
with solvents and can burst.
Flying parts can cause injury.

  Do not clean the tank on the fi lter pressure regulator with 

solvent.

WARNING

Gas mixtures can explode if there is an incompletely filled pump!

Danger to life from fl ying parts.

  Ensure that the pump and suction system are always completely 

filled with cleaning agent or working medium.

  Do not spray the device empty after cleaning.

WARNING

8.1.2 

SAFETY INSTRUCTIONS

Содержание 8286





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды