26
1SP4QSBZr
GB
General view of application
Description of unit
2.
General view of application
"QQMJDBUJPO
2.2
Coating materials
Processible coating materials
i
Pay attention to the Airless quality of the coating
materials to be processed.
%JMVUBCMFMBDRVFSTBOEQBJOUTPSUIPTFDPOUBJOJOHTPMWFOUTUXP
DPNQPOFOUDPBUJOHNBUFSJBMTEJTQFSTJPOTMBUFYQBJOUT
/PPUIFSNBUFSJBMTTIPVMECFVTFEGPSTQSBZJOHXJUIPVU8"(/&3T
approval.
Filtering
Despite suction filter and insertion filter in the spray gun, filtering of
the coating material is generally advisable.
Stir coating material before commencement of work.
i
Attention: Make sure, when stirring up with motor-
driven agitators that no air bubbles are stirred in. Air
bubbles disturb when spraying and can, in fact, lead
to interruption of operation.
Viscosity
With this unit it is possible to process highly viscous coating materials
PGVQUPBSPVOE.1BpT
If highly viscous coating materials cannot be taken in by suction, they
NVTUCFEJMVUFEJOBDDPSEBODFXJUIUIFNBOVGBDUVSFSTJOTUSVDUJPOT
Two-component coating material
5IFBQQSPQSJBUFQSPDFTTJOHUJNFNVTUCFBEIFSFEUPFYBDUMZ8JUIJO
this time rinse through and clean the unit meticulously with the
appropriate cleaning materials.
Coating materials with sharp-edged additional materials
These have a strong wear and tear effect on valves, high-pressure
hose, spray gun and tip. The durability of these parts cane be reduced
appreciably through this.
3.
Description of unit
"JSMFTTQSPDFTT
The main areas of application are thick layers of highly viscous
coating material for large areas and a high consumption of material.
A piston pump takes in the coating material by suction and conveys it
UPUIFUJQ1SFTTFEUISPVHIUIFUJQBUBQSFTTVSFPGVQUPBNBYJNVN
PGCBS .1BUIFDPBUJOHNBUFSJBMJTBUPNJTFE5IJTIJHI
pressure has the effect of micro fine atomisation of the coating
material.
As no air is used in this process, it is described as an AIRLESS process.
This method of spraying has the advantages of finest atomisation,
cloudless operation and a smooth, bubble-free surface. As well as
these, the advantages of the speed of work and convenience must
be mentioned.
3.2
Functioning of the unit
In the following there is a short description of the technical
construction for better understanding of the function.
8"(/&31SP4QSBZVOJUTBSFFMFDUSJDBMMZESJWFOIJHIQSFTTVSFTQSBZJOH
units.
A gear unit transfers the driving force to a crankshaft. The crankshaft
moves the pistons of the material feed pump up and down.
The inlet valve is opened automatically by the upwards movement
of the piston. The outlet valve is opened when the piston moves
downward.
The coating material flows under high pressure through the high-
QSFTTVSFIPTFUPUIFTQSBZHVO8IFOUIFDPBUJOHNBUFSJBMFYJUTGSPN
the tip it atomizes.
The pressure regulator controls the volume and the operating
pressure of the coating material.
Materials
Object Size
Model
PS 3.21
PS 3.23
PS 3.25
PS 3.29
PS 3.31
PS 3.34
PS 3.39
Release agents, oils, undercoats, primers, fillers,
synthetic resin-based paints, acrylic paints
recommended nozzle size: FineFinish 0.008“ - 0.014“
up to 200 m
2
200 m
2
- 800 m
2
more than 800 m
2
&NVMTJPOQBJOUTMBUFYQBJOUT
recommended nozzle size: 0.017“ - 0.027“
up to 200 m
2
200 m
2
- 800 m
2
more than 800 m
2
Anti-corrosive agents, flame retardants, fabric adhesive
recommended nozzle size: 0.021“ - 0.031“
up to 200 m
2
200 m
2
- 800 m
2
more than 800 m
2
Airless-scrapers
recommended nozzle size: 0.027“ - 0.039“
up to 200 m
2
200 m
2
- 800 m
2
more than 800 m
2
= Recommended
/PUSFDPNNFOEFE
