WAFER GSM-KEY REMOTE CONTROL UNIT
http://www.waferstar.com
#PWD123456#OPEN2-TEXT#GATE2 OPEN
Then you can use the simple SMS: GATE1 OPEN to switch on the output1 relay
#PWD123456#CLOSE2-TEXT#GATE2 CLOSE
Then you can use the simple SMS: GATE1 CLOSE to switch off the output1 relay
#PWD123456#RLY-TEXT2#GATE2 DIAN
Then you can use the simple SMS: GATE1 DIAN=5 to trigger the output1 relay for 5 second
PC Software interface:
Software language select
Select the right language according to your county,wafer will update the language step by setp.
(When Distributor need to support your local language,please contact wafer company)
COM Port parameters config interface and connect to the device
Before program the device through the PC,firstly you need to config the COM port paramters and
then connect the device to PC software.
Password is the PWD password, if no change,the initial password is “ 123456 ”
In the is program mode selection area, you have three type of the program mode to select
according your program adapter ordered ( you can confirm it from the following program adapter
pictures list )
1.
Nomal program mode (RS232 program adapter and USB program adapter)
No selection of box of the RF-KEY mode and use modem
Input the right password,initial password is “ 123456 ”
2.
RF wireless program mode ( RF program adapter )
Check the select box of the RF-KEY mode
