Wacom PTH-451, Руководство пользователя

Страница: 72 / 98

72
Contents Index
72
Index Contents
72
Index Contents
PEN PROBLEMS
When working in some
applications, the ExpressKeys
or Touch Ring perform a
different function than what is
set in the Wacom Tablet
control panel. Some applications can override and control the ExpressKey and Touch
Ring functions. See
Using integrated applications .
If using application-specific settings, be sure you have updated the
settings for the application you are working with.
The pen does not position the
screen cursor, or otherwise
work properly. If the tablet driver does not load properly, pen input will not be
available.
• You will be able to use the pen tip to move the screen cursor and
click, but there will be no other pen functionality.
• For tablet models that combine pen input and touch, basic touch
movement will continue to be recognized but other actions and
gestures will not.
Install the driver software for the tablet.
The pen does not draw or ink
with pressure sensitivity. Some applications require that you turn on the pressure capabilities
within the application or the selected tool before the pen will respond
as a pressure-sensitive tool.
Verify also that your application supports pressure sensitivity.
Clicking is difficult. Try using a lighter T
IP
F
EEL
. See Adjusting tip feel and double-click .
Double-clicking is difficult. Be sure you are quickly tapping the tablet twice in the same place on
the tablet active area. Wacom recommends using the side switch to
double-click.
Open the Wacom Tablet control panel and go to the P
EN
tab.
Try increasing the T
IP
D
OUBLE
C
LICK
D
ISTANCE
or using a lighter T
IP
F
EEL
.
Set an ExpressKey to D
OUBLE
C
LICK
and use it to issue double-clicks.
Windows: Try setting your system to launch programs with a single
click. See
Clicking .
The pen selects everything,
will not stop drawing. Open the Wacom Tablet control panel and go to the P
EN
tab. Move the
T
IP
F
EEL
slider toward F
IRM
, or select C
USTOMIZE
... and increase the
C
LICK
T
HRESHOLD
setting. If this does not help, see Testing the tablet
controls and tools .
The pen nib may be worn. See Replacing the pen nib .
The eraser selects everything
or will not stop erasing. Open the Wacom Tablet control panel and go to the E
RASER
tab.
Move the E
RASER
F
EEL
slider toward F
IRM
, or select C
USTOMIZE
... and
increase the C
LICK
T
HRESHOLD
setting. If this does not help, see Testing
the tablet controls and tools .
You notice a screen delay at
the beginning of pen or inking
strokes. Open the Wacom Tablet control panel and go to the P
EN
tab.
Try decreasing the T
IP
D
OUBLE
C
LICK
D
ISTANCE
. If that does not work,
move the T
IP
D
OUBLE
C
LICK
D
ISTANCE
slider to the O
FF
position in order
to turn off double-click assist.
Try turning off the operating system inking features.