Wacker Neuson E09-01 Скачать руководство пользователя страница 60

Страница: 60 / 188

3-18

BA 1404 en – Edition 2.7 * * 1404b330.fm

Operation

Starting machine travel

After starting the engine:

☞

The alternator charge indicator light goes out

☞

Slowly actuate the drive levers or the drive pedals

➥

Machine travel starts

Drive levers

Danger

Accident hazard due to incorrectly rotated upper carriage!

If rotated incorrectly, the upper carriage blocks the visibility of the travel path.

☞

Before starting machine travel on a construction site, align the upper car-
riage so that the operator has an unrestricted view of the travel path.

Danger

Accident hazard! The machine moves in the opposite direction if the

upper carriage is rotated by 180°!

Can cause serious injury or death.

☞

Slowly and carefully actuate the drive levers/pedals

The stabilizer blade side is the front side.
Raise the attachment and the stabilizer blade.
The machine can be moved either with the drive levers or with the drive pedals. Lock the
upper carriage when traveling over longer distances.

Forward or reverse drive speed depends on the position of the drive levers or drive pedals.

Notice!

Ensure that both tracks move as you change direction, otherwise the rubber tracks
are subject to increased abrasion.

Abb. 54: Drive levers/drive pedals

Position

Function

1
2

Push forward Push forward

Track excavator moves forward

3
4

Pull backward

Track excavator moves backward

3
2

Pull backward Push forward

Track excavator turns to the left

1
4

Push forward Pull backward

Track excavator turns to the right

Содержание E09-01





























































































































































































Результаты поиска

Содержание E09-01

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson E09-01, Руководство оператора

Результаты поиска

Содержание E09-01

Отзывы:

Бренды по названию

Популярные бренды