manualshive.com logo in svg

Wacker Neuson E09-01, Руководство оператора

Поделиться
Скачать
Wacker Neuson E09-01 Скачать руководство пользователя страница 24

1-14

BA 1404 en – Edition 2.7 * * 1404b110.fm

Introduction

Meaning

• Danger due to grease squirting out!
• Always read the Operator’s Manual before working with the track tensioner.

Location

On the travel gear.

Description

Accumulator is under high pressure. Always read the Operator’s Manual before performing 
maintenance or repairs.

Location

In the engine compartment

Description

Caution, danger due to rotating and moving parts!
Stop the engine before opening or dismounting the safety devices (for instance engine 
cover, fan guard ...)

Location

On the engine cover.

Meaning

• Caution, rotating fan!

Stop the engine before opening the engine cover!
Stay clear of the engine compartment if the fan is still running!

• Caution, danger due to rotating and moving parts!

Stay clear of the engine compartment with the engine running!
Perform work in the engine compartment at engine standstill only.

• Caution, the reservoir is hot and under pressure!

Allow the reservoir to cool down!
Carefully and slowly open the cover only after the reservoir has cooled down, to 
release the pressure.
Wear suitable protective clothing and safety glasses to open the cover.

Location

In the engine compartment

Abb. 21: Tightening the tracks

Abb. 22: Under pressure

Abb. 23: Stop the engine

Abb. 24: Hydraulic oil reservoir under pressure

Содержание E09-01





























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды