Wacker Neuson DPU 6055, Руководство оператора

Страница: 34 / 44

T00797GB
32
MAINTENANCE
Exciter
Oil
Check oil level:
1. Position vibration plate horizontally.
2. Open filler bore (40).
3. The oil level must reach the start of the thread of the filler bore (40).
4. If necessary, pour in HD brand oil SAE 10W-40 through filler bore (40) (use funnel 0,75 l).
5. Close filler bore (40).
Changing the oil:
1. Remove extension plates if necessary.
2. Open filler bore (40).
3. Tilt vibration plate and keep it tilted until the oil has run out.
4. Place vibration plate in horizontal position.
5. Pour in 0,75 l HD brand oil SAE 10W-40 through the filler bore (40).
6. Close filler bore (40).
7. Mount extension plates if necessary.
☛
ATTENTION! Do not pour in too much oil!
Exciter V-belt
It is not necessary to retighten the V-belt owing to the use of
the automatic centrifugal clutch.
Should the V-belt width fall below 15,5 mm the V-belt must be
replaced.
Changing the exciter V-belt:
1. Remove belt guard (41).
2. Undo screw (42).
3. Remove button (43), belleville spring (44), seal (45) and front segment of the V-belt pulley (10).
4. Change exciter V-belt (12).
5. Assemble the components in reverse order; make sure that the coloured marking on the pin coincides with
the marking on the V-belt pulley (10).
☛
ATTENTION! Do not oil or grease clutch components (will damage the graphite bushes).